English
86-755-83438455     info@jndchina.com
Filling Line Factory RO Water Treatment Blow Molding Machine China Cheap Water Dispenser
English
Menu
What are you looking for?
Your Position:Home>News>Company Article>China Glass Door Water Dispenser- Maintenance
Contact Us

86-755-83438455

86-755-83434555

Rm504 Phase I Tower A, Tianan High-tech Plaza Tianan Cyber Park, Chegongmiao FutianShenzhen, China

info@jndchina.com

  • Filling Line Factory RO Water Treatment Blow Molding Machine China Cheap Water Dispenser

China Glass Door Water Dispenser- Maintenance

Time:4 November 2016 Click:219

1.    Must be cut off before repair or maintenance.


2.    Don’t clean the glass door water dispenser tank and other components with harmful cleaners or chemicals.

china-glass-door-water-dispenser-maintenance

3.    Do not pour water directly on the outer shell of the china glass door water dispenser, and use the soft fabric with water immersion to clean the body


4.    If there is dust or foreign matter accumulation on the condenser, apply the water soaked soft fabric to wipe.


5.    After wiping, it was completely dry. And filling water, you can plug in power after the water flow from hot tap.


6.    The surface of electric heating tube is easy to scale when the glass door water dispenser use bottled water. Scaling will influence the efficiency of heating and the heating noise increases (which will burn the electric heating tube). Removing the scale on the hot pot, electric heating tube with special material used in the glass door water dispenser. Disinfecting and cleaning the glass door water dispenser once every 30 days. The descaling and disinfection, cleaning, maintenance of machine can be serviced by professional maintenance personnel by paying money.


7.    If the fuse is cutting of, you can directly open the junction box and use 5A (10A compressor refrigeration) new pipe replacement insurance.


8.    When the glass door water dispenser appears dry burning, the heat protection (97 degrees C) of the heating system will act (jump off). It needs manual reset at this time. If the power cord is damaged, it must be replaced with the same special power line as the machine.

china-glass-door-water-dispenser-maintenance