+6-755-83438455     info@jndchina.com
Shenzhen J&D Group
Contact

+6-755-83438455

+86-755-83434555

Rm504 Phase I Tower A, Tianan High-tech Plaza Tianan Cyber Park, Chegongmiao Futian Shenzhen, China

info@jndchina.com

  • Shenzhen J&D Group

Homogenizer

  • Homogenizer

Derived Models:

When work,it is through the three plunger , the reciprocating pump will be processed material to to the high pressure homogenizing valve, make the material flow through the valve plate and valve seat small gaps between the moment by the overflow, cavitati

Contact Now
  • Product Detail

Introduction
When work,it is through the three plunger , the reciprocating pump will be processed material to to the high pressure homogenizing valve, make the material flow through the valve plate and valve seat small gaps between the moment by the overflow, cavitation, shear and other composite force, to achieve homogeneous, emulsification purpose. The products are used on the viscosity of liquid material is lower than 0.2Pa.s, the temperature was below 80 ℃ (liquid-liquid or liquid-solid phase), the homogeneous emulsion. Mainly used for cloudy juice and juice concentrate juice;


The parts in contact with material is made of high-quality SUS304 stainless steel polishing treatment, WC hard alloy and Ding Qing rubber seal manufacturing, flat and smooth, no dead angle, in line with "HACCP" sanitary standard of food safety and hygiene standards of food machinery GB16798-1997;


Application


Production process
When granules are flowing the adjustable value in a high speed, the particle present in mixed fluids with high pressure will be subdivided into the very small size (diameter between 0.01um and 2um, average diameter small than 1um). Due to high speed impacting, cutting, expansion to explosion for pressure decrease etc. This purely physical process can protect the original product’s active, while relatively stable milk of liquid.


Advantage

1.Lubricating system
2.Lubricating system which is both squirting and splash uses soft plastic pipes that can bear high pressure and oil
3.The oil can keep stable temperature at the same producing condition, so it brings excellent lubricate effect
4.The recycle cooling system reduces driving box’s temperature and lubrication waste
5.The eccentric shaft is made of special alloy steel which is wear-resisting and has long using life
6.The half construction is easy to maintain and be knocked-down
7.Driving and eccentric shafts are drove by v-model gears which have following advantage: low noise and good stability
8.Homogenizing valve, one-way valve and piston are made of special alloy steel, with high impact-resistingand  coreosion-resisting.This material is applicable to any CIP’s corrosion-resisting
9.In special condition homogenizing and one-way valves can be made of W alloy steel which has same function
10.All kinds of sealing material have following advantages: wear-resisting, non-toxic, pressure-resisting.


Specification

homogenizer

Notes
The above model is only for reference, if you want to know more, please feel free to contact with us and give us more information, in other words, the machine could be customized by buyer’s requests.

Leave a Message Email Us

we will contact you within 24 hours.


  • TEL:+6-755-83438455
  • FAX:+86-755-83434555
  • EMAIL:info@jndchina.com
  • ADDRESS:Rm504 Phase I Tower A, Tianan High-tech Plaza Tianan Cyber Park, Chegongmiao Futian Shenzhen, China