+6-755-83438455     info@jndchina.com
Shenzhen J&D Group
Contact

+6-755-83438455

+86-755-83434555

Rm504 Phase I Tower A, Tianan High-tech Plaza Tianan Cyber Park, Chegongmiao Futian Shenzhen, China

info@jndchina.com

  • Shenzhen J&D Group

Semi-Auto Reheat Stretch Blow Moulding Machine (2L)

  • Semi-Auto Reheat Stretch Blow Moulding Machine (2L)

Derived Models:

Semi-Auto reheat stretch blow moulding machine (2L) is designed for producing PET plastic containers and bottle from 50ml-2000ml, such as carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics, wide-mouth bottle, hot-filling bottles etc

Contact Now
  • Product Detail

Introduction
Semi-Auto reheat stretch blow moulding machine (2L) is designed for producing PET plastic containers and bottle from 50ml-2000ml, such as carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics, wide-mouth bottle, hot-filling bottles etc. It’s air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. With microcomputer controlling system, it controls various technical parameter more accurately and more steadily. Only one worker can operate. Generally, the machine has two type, one heater, one blower and one heater, two blowers.


Advantage
1. Adopts double crank to adjust mold, heavy locking mold, stable and fast, adopts infrared oven to heat the preform, the preform rotated and heated equally
2. Air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow, can provide sufficient and steady high-pressure for blowing large irregular shaped bottles
3. Machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine
4. Machine can be operated in the step-by-step mode and the semi-auto mode
5. Machine is small with low investment, easy and safe to operate


Specification

emi-auto-reheat-stretch-blow-moulding-machine-2l

Notes
What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.

Leave a Message Email Us

we will contact you within 24 hours.


  • TEL:+6-755-83438455
  • FAX:+86-755-83434555
  • EMAIL:info@jndchina.com
  • ADDRESS:Rm504 Phase I Tower A, Tianan High-tech Plaza Tianan Cyber Park, Chegongmiao Futian Shenzhen, China